BayStar Cylinder Pivot Plate Swap Guide

Application Guide

The HK4200A-3 BayStar hydraulic steering kit comes with the most commonly-used cylinder (ram) to bolt to most outboards, which is the HC4645 series. Some outboards require an alternate cylinder. Please refer to the application guide below to see if your outboard requires an alternate cylinder or has any other notes:

Pivot Plate Swap

If your outboard requires a cylinder other than the HC4645 series, you can convert the HC4645 into the alternate cylinder by simply swapping the pivot plate. You can find each of the three BayStar kit variations (with the necessary pivot plate) here:

Please use the instructions below to perform the pivot plate swap:

Other Notes